Compact Ball Valve (1/2” - 6”)
- Most economically low priced ball valve.
- Working pressure ratings similar to Safety Block style @ 150 p.s.i.
- Offered in socket, threaded and flanged end connections.
- Handle position indicates open/close position.
|4||Stem O-Ring||1||EPDM, Viton®|
|7||Seat||2||EPDM, TEFLON®, Viton®|
VITON®, TEFLON® is a trademark of DuPont Performance Elastomers.
*CPVC available up to 2"
TVI Compact Ball Valves (1/2" - 6")
Design Specifications - Thermoplastic ball valves 1/2" - 4" shall be compact type and have a one piece molded body with socket or threaded end connections. Seats shall be EPDM. Every valve is fully pressure and cycle tested to insure a quality molded in place finished product.Valves have a one piece self centering ball and stem design for leak tight operation. Materials of construction shall be as follows: (select as required for service)
Body - PVC, CPVC, ASTM D-1784
Ball & Stem - PVC, CPVC, ASTM D-1784
Seats - EPDM, Ethylene Propylene Diene Monomer, Flourocarbon - (VITON® DuPont Dow Elastomers)
Seals - EPDM, Ethylene propylene Diene Monomer, Flourocarbon - (VITON® DuPont Dow Elastomers)
Manual Lever - ABS D-1788
End connectors shall conform to the following standards:
Socket - ASTM - D-2467 (PVC, SCH-80), ASTM - F-439 (CPVC, SCH-80)
Threaded - ASTM - D-2464 (PCP, SCH-80), ASTM - F-439 (CPVC,SCH-80)
Not recommended for compressed air or gas service.